Ford Crate Engines

Reliable, Performance Custom Built Small Block Ford Crate Engines 

International: +1-321-430-2465      Email: Info@CustomCrateEngines.com

* Shown With Optional Upgrades

Small Block Ford 302 Crate Engine With 380HP

Small block 5.0L 302 Ford crate engine with aluminum heads. The 302 380HP engine combination can be custom designed to tailor to your specific needs. All engines can be custom painted to match your vehicle at your request. We can outfit your engine with the exclusive March Performance serpentine belt system. We can also assist you in choosing the proper transmission and stall speed converter combination for your vehicle and have it shipped directly to you as your performance crate engine is being built.

302 Small Block Ford 380HP Engine Specifications:

  • Fully machined seasoned 302 Ford roller block
  • Block painted with 3 coats of high temp ceramic engine paint customer’s choice of color
  • Eagle steel crankshaft 3.00 stroke
  • Eagle I-Beam connecting rods with ARP bolts and bushed pins
  • High performance pistons (Speed-Pro, or Keith Black)
  • Performance rod and main bearing (Clevite, King or Federal Mogul)
  • Performance rings hand filed to match application
  • ARP main bolts
  • The complete rotating assembly is balanced
  • Three piece double roller timing set
  • Custom ground hydraulic roller camshaft
  • Hydraulic roller lifters
  • Performance aluminum cylinder heads (Edelbrock)
  • 7/16 Screw in studs and hardened guide plates
  • One piece chrome moly push rods
  • Performance roller rockers (SSR Series)
  • Melling oil pump and screen
  • Chrome front sump oil pan
  • Aluminum timing cover with scale
  • Fel-Pro gaskets
  • Edelbrock performance aluminum intake manifold
  • Performance balancer

Crate Engine

Includes all above listed
$6,145
  • Base Crate Engine Package
  • 1 Year Crate Engine Warranty
  • Pictures Of Build
  • Metal Engine Stand
  •  
  •  
  •  

Option 1

Make It A Turn Key Engine
$7,695
  • Holley Ultra HP carburetor 
  • MSD pro-billet performance distributor
  • MSD Blaster II coil
  • MSD chrome coil bracket
  • Taylor 8mm ignition wires
  • Taylor 8mm Vertical Wire Loom Kit
  • Spark plugs
  • Water pump
  • Chrome dipstick and tube
  • Chrome thermostat housing
  • Thermostat
  • Chrome air cleaner
  • Chrome breathers
  • Chrome Distributor Hold Down Clamp
  • 6 Quarts 20W-50 Conventional Oil
  • Oil filter
  • Your engine will be tested and tuned for optimum performance
  • TURN-KEY OPTION 1 YEAR UNLIMITED MILEAGE WARRANTY!

Add

Dyno Test
Add $950
  • Dyno Test
  • Your engine will be broken in under various load conditions
  • Tested in real world conditions through headers and mufflers
  • Precise horsepower and torque rating with graph and numerical print out
  • Induction system tuned for optimal performance
  • Dyno session video taped
  • 2 YEAR UNLIMITED MILEAGE WARRANTY!
  •  
  •  
March Performance Alternator Pulley Kit

Alternator Only March Performance Serpentine Kit: Add $750

Chrome 105 Amp alternator
Alternator pulley
Crankshaft pulley
Water pump pulley
Aluminum bracket with fan & nose cover
Belt tensioning bar
Serpentine belt
Installed on your engine

March Performance Alt, PS Pulley Kit

Alternator, Power Steering March Performance Serpentine Kit: Add $1,675

March Performance Style Tracks Kit #30480
105 Amp alternator chrome
Chrome Power Steering Pump
Alternator pulley
Crankshaft pulley
Water pump pulley
Power steering pump pulley
Aluminum bracket with fan & nose cover
Belt tensioning bar
*Serpentine belt included
*Kit Installed on your engine

March Performance Alt, PS, AC Pulley Kit

Alt, PS, AC March Performance Serpentine Kit: Add $2,100

March Performance Style Tracks Kit: #30490
Chrome 105 Amp alternator
GM Type II Power Steering Pump
Chrome AC Compressor
Alternator pulley
Crankshaft pulley
Water pump pulley
Power steering pump pulley
AC pump nose cover
Aluminum bracket with fan & nose cover
Belt tensioning bar
Serpentine belt
Installed on your engine

Make Your Engine Fuel Injected

FiTech Fuel Injection: Add $795

 

  • This system includes the following items:
  • Die Cast Throttle body
  • Handheld Controller
  • (4) Hi-Flow 600 HP injectors
  • Built-in pressure regulator
  • 2.5 BAR Internal MAP Sensor
  • Throttle Position Sensor
  • Idle Air Control
  • Coolant Temp Sensor
  • Wide band O2 Sensor
  • O2 Bung Kit
  • -06AN Fuel Inlet Fitting
  • Gasket Kit
MSD Ignition Box

MSD 6AL Series Ignition Box: Add $275

  • This system includes the following items:
  • Higher output with 530 primary volts and 135mJ of spark energy
  • Efficient components use less current to produce more power
  • Set an rpm limit on the 6AL with two rotary dials in 100 RPM increments
  • Same bolt pattern as the original 6AL with a lower profile housing
  • Built-in LED for system checks
  • All wires exit the same side through a locked, sealed connector

 

Mini High Torque Starter

MSD Mini High Torque Starter: Add $300

These MSD DynaForce starters feature all-new components and are hand-assembled in the USA. For maximum performance and reliability, all starters are dyno-tested and blueprinted before they leave the factory. The armature is balanced during assembly and is guided by two ball bearings for smooth engagement during thousands of starts. The MSD DynaForce starters feature a 3.4 hp motor, and a reduced 4.4:1 gear ratio delivers superior torque to start high-compression race engines up to an 18:1 ratio. They feature a downsized housing that clears most headers and oil pans, and a billet aluminum mounting block that can be clocked in different positions for tighter clearance applications. The starters have a durable red powdercoated finish that is designed for maximum protection while looking good. They use a nickel plated, heavy-duty solenoid that performs excellently in severe environments.

 

Road Race Oil Pan

Canton Racing Rear Sump RR T Pan: Add $475

The Pan Features
7 qt System Capacity
Retains Stock Depth
Diamond Shape Road Race Baffle Assembly With Four Trap DoorsCrank Scraper
Removable Windage/Anti-Slosh Baffle
1/2″ NPT Temperature Bung
Provision For Our Pan Mounted Dipstick
Magnetic Drain Plug
3/4″ Die Pickup
Universal Dipstick and Tube

 

When you purchase one of our Ford engines you are buying the finest turn-key drop in ready crate engine combinations in the world. Some of our popular engine combinations like our 289, 302, 351w and world renowned strokers like the 331, 347, 408w, and 427w are best used for street/strip hot rods. All of our turn-key drop in ready packages can also be designed to accommodate high torque truck applications. When building Ford big block engines the target is “bigger is better”

With all the after market parts made readily available today, we can custom design your crate engine to deliver extremely powerful street performance or off road track use. All our engines are built with precision to perform with quality and assurance you can depend on.
Whether your vehicle is a Mustang, Fairlane, Thunderbird, or any 60’s muscle car at Proformance Unlimited we are here to help design and build the combination that best suits your knowledge level and over all experience, so your vehicle will out perform your expectations. Please browse our engine combinations listed below. Proformance Unlimited is best known for our precision custom designs. If you have any questions and would like Proformance Unlimited to build your next engine feel free to call Doug or Steve.

Small block 5.0L 302 Ford crate engine with aluminum heads. The 302 380HP engine combination can be custom designed to tailor to your specific needs. All engines can be custom painted to match your vehicle at your request. We can outfit your engine with the exclusive March Performance serpentine belt system. We can also assist you in choosing the proper transmission and stall speed converter combination for your vehicle and have it shipped directly to you as your performance crate engine is being built.

Contact:

733 North Drive #B Melbourne, FL 32934

PH: 800-267-3940

Shop Hours:

Monday – Thursday 8:00am – 5:00pm EST

Friday 8:00am – 4:00pm EST

PROFORMANCE UNLIMITED INC. RESERVES THE RIGHT TO MAKE CHANGES IN DESIGN OR TO MAKE ADDITIONS TO OR IMPROVEMENTS UPON ANY OF ITS PRODUCTS AT ANY TIME WITHOUT INCURRING ANY OBLIGATION WHATSOEVER TO INSTALL THE SAME OR IMPROVEMENT UPON PRODUCTS PREVIOUSLY MANUFACTURED. OCCASIONALLY DEPENDING ON AVAILABILITY, PARTS MAY BE SUBSTITUTED THAT WILL NOT EFFECT PRICE, PERFORMANCE, APPEARANCE OR QUALITY OF THE PRODUCT.
*Engine shown with optional upgrades